What Are the Best Windows for a Cold Climate?
In a place like North Dakota, your windows work harder than almost anywhere in the country. Average January temperatures in Bismarck and Fargo sit in the single digits, with wind chills well below zero for months. A window that’s “good enough” in a mild climate can be a steady source of cold drafts, frost, and high heating bills here. So what actually makes a window perform in the cold? Here’s what to look for.
What Makes a Window Good for Cold Weather
1. Triple-Pane Glass
Each pane of glass — and the insulating space between panes — slows heat from escaping. Triple-pane windows add a third layer and a second insulating chamber, which makes a real difference in an extreme climate: warmer interior glass, less condensation, better sound control, and lower heat loss than a standard double-pane.
2. Low-E Coatings
Low-emissivity (Low-E) coatings are microscopically thin layers on the glass that reflect heat back into your home in winter while still letting light in. For a cold climate, the right Low-E package is tuned to keep your heat inside — a small detail that has a big effect on comfort and efficiency.
3. Insulating Gas Fills
The space between panes is filled with argon or krypton gas, which insulates far better than plain air. In a triple-pane unit, you get two gas-filled chambers doing that work, which is exactly what you want when it’s −20°F outside.
4. Fiberglass Frames
The frame matters as much as the glass. Fiberglass is dimensionally stable — it doesn’t expand, contract, warp, or conduct cold the way other materials can. That means the whole window stays warmer and tighter through years of hard freeze-thaw cycles, with less frost on the frame and fewer seasonal sticking problems.
Frame Materials at a Glance
| Frame | Cold-climate performance |
|---|---|
| Fiberglass | Excellent — dimensionally stable, low thermal transfer, long lifespan |
| Vinyl | Good insulation, but can become brittle and contract in extreme cold over time |
| Wood | Good insulator, but needs maintenance and can swell or stick with moisture |
| Aluminum | Poor for cold — conducts cold readily, prone to interior frost |
The Numbers That Matter
- U-factor — how well the window keeps heat in. Lower is better; it’s the single most important number for a cold climate.
- Air leakage — how much air sneaks through. Lower means fewer drafts.
- ENERGY STAR® (Northern Zone) — a quick way to confirm a window is rated for our climate rather than a warmer one.
Don’t Forget Installation
Even the best window underperforms if it’s installed poorly. In a cold climate, the rough opening has to be prepped, insulated, and sealed to handle freeze-thaw and block air leakage. We install with high-expansion foam and proper flashing — and because our own in-house crews do every job, the window performs the way it was engineered to. Learn more about our precision measurement and process.
Signs Your Current Windows Aren’t Up to the Cold
- Cold drafts near the window even when it’s shut
- Frost or condensation on the inside of the glass
- Rooms that never quite warm up
- Fog trapped between the panes
- Heating bills that climb every winter
If that sounds familiar, upgrading to energy-efficient replacement windows built for our climate is one of the highest-impact improvements you can make to a North Dakota home.
Frequently Asked Questions
Are triple-pane windows worth it in North Dakota?
For our climate, yes. The extra pane and second insulating chamber keep the interior glass warmer, cut heat loss, reduce frost and condensation, and improve sound control — benefits you feel most in an extreme cold climate like ND.
What is the most energy-efficient window frame for cold weather?
Fiberglass. It’s dimensionally stable, resists warping and thermal transfer, and keeps the whole window tighter and warmer through years of freeze-thaw.
What U-factor should I look for in a cold climate?
A lower U-factor is better — it means less heat escapes. Look for windows rated for the ENERGY STAR® Northern (Zone 5) climate zone, which is the standard for North Dakota.
Do I need special glass for North Dakota winters?
You want a Low-E coating tuned for cold climates plus insulating gas fills, ideally in a triple-pane unit. That combination keeps heat in and the interior glass warm enough to resist frost.
Build a Window Package for Our Climate
Our Bismarck and Fargo team will help you choose the glass, frame, and options that make sense for your home — with a free, no-pressure in-home estimate.

Andrew Sletten | Co-Owner, Fargo Division
Andrew Sletten serves as Co-Owner of the Fargo divisions for both The Bathroom Store and The Window & Door Store. With a comprehensive background in home performance and aesthetics, Andrew is a driving force behind our commitment to quality in the Red River Valley. He focuses on streamlining the remodeling process, ensuring that every project—from a custom bath oasis to high-efficiency window replacements—is executed with precision and a “customer-first” mentality.